FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_hypothesismean1.wasp
Title produced by softwareTesting Mean with known Variance - Critical Value
Date of computationThu, 13 Nov 2008 11:58:25 -0700
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Nov/13/t12266028274hemkifjajs0llr.htm/, Retrieved Sun, 19 May 2024 08:41:56 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=24776, Retrieved Sun, 19 May 2024 08:41:56 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact125

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F       [Testing Mean with known Variance - Critical Value] [Q1 Porcs] [2008-11-13 18:58:25] [d300b7a0882cee7d84584ad37a3d4ede] [Current]
Feedback Forum
2008-11-23 21:43:03 [Peter Van Doninck] [reply] 
De studente heeft een correcte argumentatie gegeven waarom de null hypothese niet verworpen wordt. Ze geeft echter enkel min of meer een verklaring van de one sided test. Het is belangrijk om toe te voegen dat een two sided test ook uitgevoerd kan worden. Er kan immers een afwijking bestaan in de 2 richtingen. De producent kan te weinig vet ofwel te veel vet in de producten verwerken. De gevonden waarde van 15,46% ligt tussen 11% en 19,5%, zijnde het 95% betrouwbaarheidsinterval.
2008-11-24 14:03:47 [Julian De Ruyter] [reply] 
Correct omdat de student de onetailed test argumenteerd. Ook de two-tailed kon hier gebruikt worden omdat de producent 2 afwijkingen kan doen voorkomen; te veel of te weinig vet.
15,46% ligt tussen [11% - 19,5%], wat het 95% betrouwbaarheidsinterval is.
2008-11-24 15:41:17 [Sofie Sergoynne] [reply] 
ik denk dat ik de taak wel goed heb uitgevoerd. Had er idd ook nog kunnen bijzetten dat we ook een 2 sides test hadden kunnen doen en dat we zo de vetgehaltes langs boven en langs onder hadden kunnen berekenen.

Post a new message

Dataset

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time0 seconds
R Server'George Udny Yule' @ 72.249.76.132

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 0 seconds \tabularnewline
R Server & 'George Udny Yule' @ 72.249.76.132 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24776&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]0 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'George Udny Yule' @ 72.249.76.132[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24776&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24776&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time0 seconds
R Server'George Udny Yule' @ 72.249.76.132






Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis

\begin{tabular}{lllllllll}
\hline
Testing Mean with known Variance \tabularnewline
sample size & 27 \tabularnewline
population variance & 0.012 \tabularnewline
sample mean & 0.1546 \tabularnewline
null hypothesis about mean & 0.15 \tabularnewline
type I error & 0.05 \tabularnewline
critical value (one-tailed) & 0.184676559191704 \tabularnewline
confidence interval (two-tailed)(sample mean) & [ 0.113280331179696 ,  0.195919668820304 ] \tabularnewline
conclusion for one-tailed test \tabularnewline
Do not reject the null hypothesis. \tabularnewline
conclusion for two-tailed test \tabularnewline
Do not reject the null hypothesis \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24776&T=1

[TABLE]
[ROW][C]Testing Mean with known Variance[/C][/ROW]
[ROW][C]sample size[/C][C]27[/C][/ROW]
[ROW][C]population variance[/C][C]0.012[/C][/ROW]
[ROW][C]sample mean[/C][C]0.1546[/C][/ROW]
[ROW][C]null hypothesis about mean[/C][C]0.15[/C][/ROW]
[ROW][C]type I error[/C][C]0.05[/C][/ROW]
[ROW][C]critical value (one-tailed)[/C][C]0.184676559191704[/C][/ROW]
[ROW][C]confidence interval (two-tailed)(sample mean)[/C][C][ 0.113280331179696 ,  0.195919668820304 ][/C][/ROW]
[ROW][C]conclusion for one-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis.[/C][/ROW]
[ROW][C]conclusion for two-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24776&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24776&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
Parameters (R input):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
R code (references can be found in the software module):
par1<-as.numeric(par1)
par2<-as.numeric(par2)
par3<-as.numeric(par3)
par4<-as.numeric(par4)
par5<-as.numeric(par5)
c <- 'NA'
csn <- abs(qnorm(par5))
csn2 <- abs(qnorm(par5/2))
if (par3 == par4)
{
conclusion <- 'Error: the null hypothesis and sample mean must not be equal.'
conclusion2 <- conclusion
} else {
cleft <- par3 - csn2 * sqrt(par2) / sqrt(par1)
cright <- par3 + csn2 * sqrt(par2) / sqrt(par1)
c2 <- paste('[',cleft)
c2 <- paste(c2,', ')
c2 <- paste(c2,cright)
c2 <- paste(c2,']')
if ((par4 < cleft) | (par4 > cright))
{
conclusion2 <- 'Reject the null hypothesis'
} else {
conclusion2 <- 'Do not reject the null hypothesis'
}
}
if (par3 > par4)
{
c <- par4 + csn * sqrt(par2) / sqrt(par1)
if (par3 < c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
if (par3 < par4)
{
c <- par4 - csn * sqrt(par2) / sqrt(par1)
if (par3 > c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
c
conclusion
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm','Testing Mean with known Variance','learn more about Statistical Hypothesis Testing about the Mean when the Variance is known'),2,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample size',header=TRUE)
a<-table.element(a,par1)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'population variance',header=TRUE)
a<-table.element(a,par2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample mean',header=TRUE)
a<-table.element(a,par3)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'null hypothesis about mean',header=TRUE)
a<-table.element(a,par4)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'type I error',header=TRUE)
a<-table.element(a,par5)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm#overview','critical value (one-tailed)','about the critical value'),header=TRUE)
a<-table.element(a,c)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'confidence interval (two-tailed)
(sample mean)',header=TRUE)
a<-table.element(a,c2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for one-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion,2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for two-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion2,2)
a<-table.row.end(a)
a<-table.end(a)
table.save(a,file='mytable.tab')