FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*Unverified author*
R Software Modulerwasp_notchedbox1.wasp
Title produced by softwareNotched Boxplots
Date of computationSat, 01 Nov 2008 08:07:31 -0600
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Nov/01/t1225548564vlo9nue3bxm53dt.htm/, Retrieved Mon, 20 May 2024 04:53:38 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=20401, Retrieved Mon, 20 May 2024 04:53:38 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact157

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F       [Notched Boxplots] [notched boxplots] [2008-11-01 14:07:31] [81dc0ee785f23261ccd6abf7aef76c2a] [Current]
Feedback Forum
2008-11-11 14:20:32 [Bonifer Spillemaeckers] [reply] 
Deze vraag heb ik min of meer correct opgelost. Ik heb hier een correcte reproductie gemaakt, maar mijn conclusie was niet helemaal correct.

De mediaan van de boxplot van de industriële productie ligt hier hoger dan de mediaan van de boxplot van de kledingproductie. De mediaan van de eerste boxplot ligt net boven 100. We kunnen dus stellen dat de industriële productie hier lichtjes is gestegen tov het basisjaar. De kledingproductie daarentegen is gedaald tov het basisjaar. Als we gaan kijken naar de inkepingen (= betrouwbaarheidsintervallen) van de 2 boxplots, dan kunnen we vaststellen dat de mediaan van de kledingproductie beduidend lager ligt dan deze van de industriële productie. Er is hier ook geen sprake van toeval, aangezien de 2 boxplots elkaar niet overlappen.

Ik kijk hier ook naar de spreiding van de boxplot, maar dit is niet correct. Je moet hier kijken naar de mediaan van de ene boxplot tov de mediaan van de andere boxplot.

Post a new message

Dataset

Dataseries X:
Download CSV
Histogram
Boxplots 
110.40	109.20
96.40	88.60
101.90	94.30
106.20	98.30
81.00	86.40
94.70	80.60
101.00	104.10
109.40	108.20
102.30	93.40
90.70	71.90
96.20	94.10
96.10	94.90
106.00	96.40
103.10	91.10
102.00	84.40
104.70	86.40
86.00	88.00
92.10	75.10
106.90	109.70
112.60	103.00
101.70	82.10
92.00	68.00
97.40	96.40
97.00	94.30
105.40	90.00
102.70	88.00
98.10	76.10
104.50	82.50
87.40	81.40
89.90	66.50
109.80	97.20
111.70	94.10
98.60	80.70
96.90	70.50
95.10	87.80
97.00	89.50
112.70	99.60
102.90	84.20
97.40	75.10
111.40	92.00
87.40	80.80
96.80	73.10
114.10	99.80
110.30	90.00
103.90	83.10
101.60	72.40
94.60	78.80
95.90	87.30
104.70	91.00
102.80	80.10
98.10	73.60
113.90	86.40
80.90	74.50
95.70	71.20
113.20	92.40
105.90	81.50
108.80	85.30
102.30	69.90
99.00	84.20
100.70	90.70
115.50	100.30

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'George Udny Yule' @ 72.249.76.132

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'George Udny Yule' @ 72.249.76.132 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=20401&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'George Udny Yule' @ 72.249.76.132[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=20401&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=20401&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'George Udny Yule' @ 72.249.76.132






Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
total8696.2101.7106115.5
clothing66.580.687.394.1109.7

\begin{tabular}{lllllllll}
\hline
Boxplot statistics \tabularnewline
Variable & lower whisker & lower hinge & median & upper hinge & upper whisker \tabularnewline
total & 86 & 96.2 & 101.7 & 106 & 115.5 \tabularnewline
clothing & 66.5 & 80.6 & 87.3 & 94.1 & 109.7 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=20401&T=1

[TABLE]
[ROW][C]Boxplot statistics[/C][/ROW]
[ROW][C]Variable[/C][C]lower whisker[/C][C]lower hinge[/C][C]median[/C][C]upper hinge[/C][C]upper whisker[/C][/ROW]
[ROW][C]total[/C][C]86[/C][C]96.2[/C][C]101.7[/C][C]106[/C][C]115.5[/C][/ROW]
[ROW][C]clothing[/C][C]66.5[/C][C]80.6[/C][C]87.3[/C][C]94.1[/C][C]109.7[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=20401&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=20401&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
total8696.2101.7106115.5
clothing66.580.687.394.1109.7






Boxplot Notches
Variablelower boundmedianupper bound
total99.717476951119101.7103.682523048881
clothing84.568973351031387.390.0310266489687

\begin{tabular}{lllllllll}
\hline
Boxplot Notches \tabularnewline
Variable & lower bound & median & upper bound \tabularnewline
total & 99.717476951119 & 101.7 & 103.682523048881 \tabularnewline
clothing & 84.5689733510313 & 87.3 & 90.0310266489687 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=20401&T=2

[TABLE]
[ROW][C]Boxplot Notches[/C][/ROW]
[ROW][C]Variable[/C][C]lower bound[/C][C]median[/C][C]upper bound[/C][/ROW]
[ROW][C]total[/C][C]99.717476951119[/C][C]101.7[/C][C]103.682523048881[/C][/ROW]
[ROW][C]clothing[/C][C]84.5689733510313[/C][C]87.3[/C][C]90.0310266489687[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=20401&T=2

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=20401&T=2

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Boxplot Notches
Variablelower boundmedianupper bound
total99.717476951119101.7103.682523048881
clothing84.568973351031387.390.0310266489687


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = grey ;
Parameters (R input):
par1 = grey ;
R code (references can be found in the software module):
z <- as.data.frame(t(y))
bitmap(file='test1.png')
(r<-boxplot(z ,xlab=xlab,ylab=ylab,main=main,notch=TRUE,col=par1))
dev.off()
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('overview.htm','Boxplot statistics','Boxplot overview'),6,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,hyperlink('lower_whisker.htm','lower whisker','definition of lower whisker'),1,TRUE)
a<-table.element(a,hyperlink('lower_hinge.htm','lower hinge','definition of lower hinge'),1,TRUE)
a<-table.element(a,hyperlink('central_tendency.htm','median','definitions about measures of central tendency'),1,TRUE)
a<-table.element(a,hyperlink('upper_hinge.htm','upper hinge','definition of upper hinge'),1,TRUE)
a<-table.element(a,hyperlink('upper_whisker.htm','upper whisker','definition of upper whisker'),1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
for (j in 1:5)
{
a<-table.element(a,r$stats[j,i])
}
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable.tab')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Boxplot Notches',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,'lower bound',1,TRUE)
a<-table.element(a,'median',1,TRUE)
a<-table.element(a,'upper bound',1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
a<-table.element(a,r$conf[1,i])
a<-table.element(a,r$stats[3,i])
a<-table.element(a,r$conf[2,i])
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable1.tab')