TNA supports the analysis of transition networks constructed from
grouped sequence data. Groups can be defined in several ways, but
mainly: using a pre-existing grouping variable in the data (e.g., a
demographic or experimental condition), or by clustering the sequences
themselves based on their similarity. This vignette demonstrates both
approaches using the group_regulation_long dataset.
First, we load the packages we will use for this example.
We import the data in long format and prepare it for analysis. The
prepare_data() function converts the long-format event log
into wide-format sequences. The unused columns in the dataset are stored
in the metadata of prepared and we can use them later
on.
When the data contains a grouping variable, we can build separate TNA
models for each group directly. Here, the "Achiever" column
in the metadata splits the sequences into two groups (high vs. low
achievers).
The plot_compare() function visualizes the difference
network between the two groups. Green edges and donut segments indicate
that the first group (High achievers) has higher values, while red
indicates the opposite (Low achievers have higher values).
The difference network shows how large the differences are, but not whether they exceed what the random assignment of students to the two groups would produce. A permutation test answers that question: it reassigns the sequences to the groups many times and keeps only the edges whose observed difference is unlikely under these reassignments.
We can also compare the frequency of subsequences across groups. Here we look at subsequences of length 3 to 5, keeping only those that appear at least 5 times, and apply FDR correction for multiple comparisons.
subsequence_comparison <- compare_sequences(achievers,
sub = 3:5,
min_freq = 5,
adjust = "fdr")
plot(subsequence_comparison, cells = TRUE)When no pre-existing grouping variable is available, we can cluster
the sequences based on their pairwise dissimilarity. The
cluster_sequences() function computes the dissimilarity
between every pair of sequences (the Hamming distance by default) and
partitions the sequences into k clusters (with PAM by
default).
To choose an appropriate number of clusters, we can compare the silhouette score for different values of k, which the printed clustering reports. Higher silhouette values indicate better-separated clusters.
lapply(2:4, \(k) cluster_sequences(prepared, k = k))
#> [[1]]
#> Clustering method: pam
#> Number of clusters: 2
#> Silhouette score: 0.1838904
#> Cluster sizes:
#> 1 2
#> 982 1018
#>
#> [[2]]
#> Clustering method: pam
#> Number of clusters: 3
#> Silhouette score: 0.1850873
#> Cluster sizes:
#> 1 2 3
#> 893 494 613
#>
#> [[3]]
#> Clustering method: pam
#> Number of clusters: 4
#> Silhouette score: 0.1327345
#> Cluster sizes:
#> 1 2 3 4
#> 707 506 379 408Once we have chosen k, we build the grouped TNA model directly from the clustering result, which carries the sequences and their cluster assignments.
We can summarize the cluster-specific models to compare their overall characteristics.
| metric | Group 1 | Group 2 | Group 3 |
|---|---|---|---|
| Node Count | 9.00 | 9.00 | 9.00 |
| Edge Count | 78.00 | 77.00 | 77.00 |
| Network Density | 1.00 | 1.00 | 1.00 |
| Mean Distance | 0.04 | 0.05 | 0.05 |
| Mean Out-Strength | 1.00 | 1.00 | 1.00 |
| SD Out-Strength | 0.00 | 0.00 | 0.00 |
| Mean In-Strength | 1.00 | 1.00 | 1.00 |
| SD In-Strength | 0.76 | 0.84 | 0.81 |
| Mean Out-Degree | 8.67 | 8.56 | 8.56 |
| SD Out-Degree | 0.71 | 0.73 | 0.73 |
| Centralization (Out-Degree) | 0.02 | 0.03 | 0.03 |
| Centralization (In-Degree) | 0.02 | 0.03 | 0.03 |
| Reciprocity | 0.99 | 0.97 | 0.97 |
Printing the grouped model shows, for each cluster, the full transition probability matrix and the initial probabilities, which show which states are most common at the start of the sequences in each cluster.
print(tna_model_clus, digits = 2)
#> Group 1 :
#> State Labels :
#>
#> adapt, cohesion, consensus, coregulate, discuss, emotion, monitor, plan, synthesis
#>
#> Transition Probability Matrix :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor plan
#> adapt 0.00000 0.3333 0.431 0.016 0.041 0.122 0.049 0.0081
#> cohesion 0.00524 0.0209 0.476 0.113 0.089 0.128 0.034 0.1283
#> consensus 0.00855 0.0093 0.082 0.205 0.221 0.076 0.042 0.3450
#> coregulate 0.01305 0.0470 0.115 0.021 0.311 0.198 0.076 0.1906
#> discuss 0.07395 0.0525 0.319 0.077 0.197 0.117 0.018 0.0086
#> emotion 0.00306 0.3323 0.345 0.031 0.100 0.072 0.032 0.0827
#> monitor 0.01401 0.0672 0.151 0.059 0.387 0.104 0.028 0.1849
#> plan 0.00091 0.0183 0.286 0.012 0.073 0.166 0.091 0.3498
#> synthesis 0.28000 0.0333 0.447 0.060 0.053 0.080 0.020 0.0267
#> synthesis
#> adapt 0.0000
#> cohesion 0.0052
#> consensus 0.0109
#> coregulate 0.0287
#> discuss 0.1361
#> emotion 0.0031
#> monitor 0.0056
#> plan 0.0027
#> synthesis 0.0000
#>
#> Initial Probabilities :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor
#> 0.010 0.060 0.170 0.015 0.177 0.157 0.151
#> plan synthesis
#> 0.236 0.024
#>
#> Group 2 :
#> State Labels :
#>
#> adapt, cohesion, consensus, coregulate, discuss, emotion, monitor, plan, synthesis
#>
#> Transition Probability Matrix :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor plan
#> adapt 0.0000 0.241 0.524 0.028 0.066 0.104 0.033 0.0047
#> cohesion 0.0015 0.025 0.522 0.114 0.047 0.115 0.034 0.1391
#> consensus 0.0040 0.014 0.092 0.178 0.187 0.071 0.048 0.3989
#> coregulate 0.0131 0.033 0.149 0.024 0.260 0.165 0.100 0.2357
#> discuss 0.0719 0.040 0.328 0.086 0.178 0.107 0.029 0.0130
#> emotion 0.0000 0.320 0.326 0.034 0.101 0.077 0.041 0.0988
#> monitor 0.0139 0.054 0.170 0.059 0.385 0.094 0.017 0.1854
#> plan 0.0019 0.026 0.302 0.017 0.070 0.148 0.070 0.3627
#> synthesis 0.2273 0.038 0.469 0.042 0.063 0.063 0.014 0.0839
#> synthesis
#> adapt 0.0000
#> cohesion 0.0015
#> consensus 0.0069
#> coregulate 0.0202
#> discuss 0.1481
#> emotion 0.0026
#> monitor 0.0225
#> plan 0.0019
#> synthesis 0.0000
#>
#> Initial Probabilities :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor
#> 0.010 0.067 0.184 0.028 0.194 0.140 0.128
#> plan synthesis
#> 0.229 0.020
#>
#> Group 3 :
#> State Labels :
#>
#> adapt, cohesion, consensus, coregulate, discuss, emotion, monitor, plan, synthesis
#>
#> Transition Probability Matrix :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor plan
#> adapt 0.0000 0.270 0.45 0.017 0.063 0.138 0.0230 0.034
#> cohesion 0.0031 0.033 0.49 0.129 0.055 0.108 0.0314 0.151
#> consensus 0.0035 0.019 0.07 0.189 0.171 0.073 0.0478 0.421
#> coregulate 0.0214 0.033 0.13 0.024 0.270 0.166 0.0763 0.268
#> discuss 0.0691 0.053 0.31 0.088 0.213 0.098 0.0171 0.012
#> emotion 0.0049 0.327 0.30 0.036 0.105 0.079 0.0333 0.112
#> monitor 0.0060 0.050 0.15 0.056 0.357 0.078 0.0120 0.273
#> plan 0.0000 0.027 0.28 0.019 0.064 0.137 0.0740 0.397
#> synthesis 0.2130 0.028 0.48 0.037 0.069 0.074 0.0046 0.097
#> synthesis
#> adapt 0.0000
#> cohesion 0.0047
#> consensus 0.0065
#> coregulate 0.0120
#> discuss 0.1360
#> emotion 0.0029
#> monitor 0.0160
#> plan 0.0012
#> synthesis 0.0000
#>
#> Initial Probabilities :
#>
#> adapt cohesion consensus coregulate discuss emotion monitor
#> 0.015 0.055 0.302 0.018 0.158 0.153 0.147
#> plan synthesis
#> 0.139 0.013Just like ordinary TNA models, we can retain only the statistically robust edges. The bootstrap resamples the sequences of each cluster and keeps the edges whose weight stays within the consistency range (by default 75% to 125% of the observed weight) in at least 95% of the resamples, so the plotted networks show only the transitions that do not depend on a few sequences.
Centrality measures can be computed for each cluster to identify which states play central roles in each group’s transition dynamics.
centrality_measures <- c(
"BetweennessRSP",
"Closeness",
"InStrength",
"OutStrength"
)
centralities_per_cluster <- centralities(
tna_model_clus,
measures = centrality_measures
)
plot(
centralities_per_cluster, ncol = 4,
colors = c("purple", "orange", "pink")
)Finally, we can compare subsequence frequencies across the clusters, just as we did for the pre-existing groups above.
subsequence_comparison <- compare_sequences(tna_model_clus, sub = 3:5, min_freq = 5, adjust = "fdr")
plot(subsequence_comparison, cells = TRUE)Package articles · sonsoles.me/tna
prepare_data()Tutorials · sonsoles.me
Book chapters · Advanced Learning Analytics Methods
Dynalytics · dynasite.org