Creating a PK NCA or Population PK ADaM

Introduction

This article describes creating a Pharmacokinetics (PK) Non-compartmental analysis (NCA) ADaM (ADNCA/ADPC) or a Population PK ADaM (ADPPK). The first part of the article describes the NCA file creation while the second part describes Population PK. This initial steps for both files are very similar and could be combined in one script if desired.

Programming PK NCA (ADPC/ADNCA) Analysis Data

The Non-compartmental analysis (NCA) ADaM uses the CDISC Implementation Guide (https://www.cdisc.org/standards/foundational/adam/adamig-non-compartmental-analysis-input-data-v1-0). This example presented uses underlying EX and PC domains where the EX and PC domains represent data as collected and the ADPC ADaM is output. However, the example can be applied to situations where an EC domain is used as input instead of EX and/or ADNCA or another ADaM is created.

One of the important aspects of the dataset is the derivation of relative timing variables. These variables consist of nominal and actual times, and refer to the time from first dose or time from most recent reference dose. The reference dose for pre-dose records may be the upcoming dose. The CDISC Implementation Guide makes use of duplicated records for analysis, which allows the same record to be used both with respect to the previous dose and the next upcoming dose. This is illustrated later in this vignette.

Here are the relative time variables we will use. These correspond to the names in the CDISC Implementation Guide.

Variable Variable Label
NFRLT Nom. Rel. Time from Analyte First Dose
AFRLT Act. Rel. Time from Analyte First Dose
NRRLT Nominal Rel. Time from Ref. Dose
ARRLT Actual Rel. Time from Ref. Dose
MRRLT Modified Rel. Time from Ref. Dose

Note: All examples assume CDISC SDTM and/or ADaM format as input unless otherwise specified.

ADPC Programming Workflow

Read in Data

To start, all data frames needed for the creation of ADPC should be read into the environment. This will be a company specific process. Some of the data frames needed may be PC, EX, and ADSL.

Additional domains such as VS and LB may be used for additional baseline variables if needed. These may come from either the SDTM or ADaM source.

For the purpose of example, the CDISC Pilot SDTM and ADaM datasets—which are included in {pharmaversesdtm}—are used.

library(dplyr, warn.conflicts = FALSE)
library(admiral)
library(pharmaversesdtm)
library(lubridate)
library(stringr)
library(tibble)

data("admiral_adsl")
data("ex")
data("pc")
data("vs")
data("lb")

adsl <- admiral_adsl
ex <- convert_blanks_to_na(ex)

# Load PC

pc <- convert_blanks_to_na(pc)

# Load VS for baseline height and weight

vs <- convert_blanks_to_na(vs)

# Load LB for baseline lab values

lb <- convert_blanks_to_na(lb) %>%
  filter(LBBLFL == "Y")

# ---- Lookup tables ----
param_lookup <- tibble::tribble(
  ~PCTESTCD, ~PARAMCD, ~PARAM, ~PARAMN,
  "XAN", "XAN", "Pharmacokinetic concentration of Xanomeline", 1,
  "DOSE", "DOSE", "Xanomeline Patch Dose", 2,
)

At this step, it may be useful to join ADSL to your PC and EX domains as well. Only the ADSL variables used for derivations are selected at this step. The rest of the relevant ADSL variables will be added later.

In this case we will keep TRTSDT/TRTSDTM for day derivation and TRT01P/TRT01A for planned and actual treatments.

In this segment we will use derive_vars_merged() to join the ADSL variables and the following {admiral} functions to derive analysis dates, times and days: derive_vars_dtm(), derive_vars_dtm_to_dt(), derive_vars_dtm_to_tm(), derive_vars_dy(). We will also create NFRLT for PC data based on PCTPTNUM. We will create an event ID (EVID) of 0 for concentration records and 1 for dosing records. This is a traditional variable that will provide a handy tool to identify records but will be dropped from the final dataset in this example.

adsl_vars <- exprs(TRTSDT, TRTSDTM, TRT01P, TRT01A)

pc_dates <- pc %>%
  # Join ADSL with PC (need TRTSDT for ADY derivation)
  derive_vars_merged(
    dataset_add = adsl,
    new_vars = adsl_vars,
    by_vars = exprs(STUDYID, USUBJID)
  ) %>%
  # Derive analysis date/time
  # Impute missing time to 00:00:00
  derive_vars_dtm(
    new_vars_prefix = "A",
    dtc = PCDTC,
    time_imputation = "00:00:00"
  ) %>%
  # Derive dates and times from date/times
  derive_vars_dtm_to_dt(exprs(ADTM)) %>%
  derive_vars_dtm_to_tm(exprs(ADTM)) %>%
  derive_vars_dy(reference_date = TRTSDT, source_vars = exprs(ADT)) %>%
  # Derive event ID and nominal relative time from first dose (NFRLT)
  mutate(
    EVID = 0,
    DRUG = PCTEST,
    NFRLT = if_else(PCTPTNUM < 0, 0, PCTPTNUM), .after = USUBJID
  )
USUBJID PCTEST ADTM VISIT PCTPT NFRLT
01-701-1028 XANOMELINE 2013-07-18 23:30:00 BASELINE Pre-dose 0.00
01-701-1028 XANOMELINE 2013-07-19 00:05:00 BASELINE 5 Min Post-dose 0.08
01-701-1028 XANOMELINE 2013-07-19 00:30:00 BASELINE 30 Min Post-dose 0.50
01-701-1028 XANOMELINE 2013-07-19 01:00:00 BASELINE 1h Post-dose 1.00
01-701-1028 XANOMELINE 2013-07-19 01:30:00 BASELINE 1.5h Post-dose 1.50
01-701-1028 XANOMELINE 2013-07-19 02:00:00 BASELINE 2h Post-dose 2.00
01-701-1028 XANOMELINE 2013-07-19 04:00:00 BASELINE 4h Post-dose 4.00
01-701-1028 XANOMELINE 2013-07-19 06:00:00 BASELINE 6h Post-dose 6.00
01-701-1028 XANOMELINE 2013-07-19 08:00:00 BASELINE 8h Post-dose 8.00
01-701-1028 XANOMELINE 2013-07-19 12:00:00 BASELINE 12h Post-dose 12.00

Next we will also join ADSL data with EX and derive dates/times. This section uses the {admiral} functions derive_vars_merged(), derive_vars_dtm(), and derive_vars_dtm_to_dt(). Time is imputed to 00:00:00 here for reasons specific to the sample data. Other imputation times may be used based on study details. Here we create NFRLT for EX data based on VISITDY using dplyr::mutate().

# ---- Get dosing information ----

ex_dates <- ex %>%
  derive_vars_merged(
    dataset_add = adsl,
    new_vars = adsl_vars,
    by_vars = exprs(STUDYID, USUBJID)
  ) %>%
  # Keep records with nonzero dose
  filter(EXDOSE > 0) %>%
  # Add time and set missing end date to start date
  # Impute missing time to 00:00:00
  # Note all times are missing for dosing records in this example data
  # Derive Analysis Start and End Dates
  derive_vars_dtm(
    new_vars_prefix = "AST",
    dtc = EXSTDTC,
    time_imputation = "00:00:00"
  ) %>%
  derive_vars_dtm(
    new_vars_prefix = "AEN",
    dtc = EXENDTC,
    time_imputation = "00:00:00"
  ) %>%
  # Derive event ID and nominal relative time from first dose (NFRLT)
  mutate(
    EVID = 1,
    NFRLT = case_when(
      VISITDY == 1 ~ 0,
      TRUE ~ 24 * VISITDY
    )
  ) %>%
  # Set missing end dates to start date
  mutate(AENDTM = case_when(
    is.na(AENDTM) ~ ASTDTM,
    TRUE ~ AENDTM
  )) %>%
  # Derive dates from date/times
  derive_vars_dtm_to_dt(exprs(ASTDTM)) %>%
  derive_vars_dtm_to_dt(exprs(AENDTM))
USUBJID EXTRT EXDOSFRQ ASTDTM AENDTM VISIT VISITDY NFRLT
01-701-1028 XANOMELINE QD 2013-07-19 2013-08-01 BASELINE 1 0
01-701-1028 XANOMELINE QD 2013-08-02 2014-01-06 WEEK 2 14 336
01-701-1028 XANOMELINE QD 2014-01-07 2014-01-14 WEEK 24 168 4032
01-701-1033 XANOMELINE QD 2014-03-18 2014-03-31 BASELINE 1 0
01-701-1442 XANOMELINE QD 2013-10-26 2013-11-09 BASELINE 1 0
01-701-1442 XANOMELINE QD 2013-11-10 2014-04-17 WEEK 2 14 336
01-701-1442 XANOMELINE QD 2014-04-18 2014-04-26 WEEK 24 168 4032
01-714-1288 XANOMELINE QD 2013-12-04 2013-12-17 BASELINE 1 0
01-714-1288 XANOMELINE QD 2013-12-18 2014-05-27 WEEK 2 14 336
01-714-1288 XANOMELINE QD 2014-05-28 2014-06-17 WEEK 24 168 4032

Expand Dosing Records

The function create_single_dose_dataset() can be used to expand dosing records between the start date and end date. The nominal time will also be expanded based on the values of EXDOSFRQ, for example “QD” will result in nominal time being incremented by 24 hours and “BID” will result in nominal time being incremented by 12 hours. This is a new feature of create_single_dose_dataset().

Dates and times will be derived after expansion using derive_vars_dtm_to_dt() and derive_vars_dtm_to_tm().

For this example study we will define analysis visit (AVISIT) based on the nominal day value from NFRLT and give it the format, “Day 1”, “Day 2”, “Day 3”, etc. This is important for creating the BASETYPE variable later. DRUG is created from EXTRT here. This will be useful for linking treatment data with concentration data if there are multiple drugs and/or analytes, but this variable will also be dropped from the final dataset in this example.

# ---- Expand dosing records between start and end dates ----

ex_exp <- ex_dates %>%
  create_single_dose_dataset(
    dose_freq = EXDOSFRQ,
    start_date = ASTDT,
    start_datetime = ASTDTM,
    end_date = AENDT,
    end_datetime = AENDTM,
    nominal_time = NFRLT,
    lookup_table = dose_freq_lookup,
    lookup_column = CDISC_VALUE,
    keep_source_vars = exprs(
      STUDYID, USUBJID, EVID, EXDOSFRQ, EXDOSFRM,
      NFRLT, EXDOSE, EXDOSU, EXTRT, ASTDT, ASTDTM, AENDT, AENDTM,
      VISIT, VISITNUM, VISITDY, TRT01A, TRT01P, DOMAIN, EXSEQ, !!!adsl_vars
    )
  ) %>%
  # Derive AVISIT based on nominal relative time
  # Derive AVISITN to nominal time in whole days using integer division
  # Define AVISIT based on nominal day
  mutate(
    AVISITN = NFRLT %/% 24 + 1,
    AVISIT = paste("Day", AVISITN),
    ADTM = ASTDTM,
    DRUG = EXTRT,
  ) %>%
  # Derive dates and times from datetimes
  derive_vars_dtm_to_dt(exprs(ADTM)) %>%
  derive_vars_dtm_to_tm(exprs(ADTM)) %>%
  derive_vars_dtm_to_tm(exprs(ASTDTM)) %>%
  derive_vars_dtm_to_tm(exprs(AENDTM)) %>%
  derive_vars_dy(reference_date = TRTSDT, source_vars = exprs(ADT))
USUBJID DRUG EXDOSFRQ ASTDTM AENDTM AVISIT NFRLT
01-701-1028 XANOMELINE ONCE 2013-07-19 2013-07-19 Day 1 0
01-701-1028 XANOMELINE ONCE 2013-07-20 2013-07-20 Day 2 24
01-701-1028 XANOMELINE ONCE 2013-07-21 2013-07-21 Day 3 48
01-701-1028 XANOMELINE ONCE 2013-07-22 2013-07-22 Day 4 72
01-701-1028 XANOMELINE ONCE 2013-07-23 2013-07-23 Day 5 96
01-701-1028 XANOMELINE ONCE 2013-07-24 2013-07-24 Day 6 120
01-701-1028 XANOMELINE ONCE 2013-07-25 2013-07-25 Day 7 144
01-701-1028 XANOMELINE ONCE 2013-07-26 2013-07-26 Day 8 168
01-701-1028 XANOMELINE ONCE 2013-07-27 2013-07-27 Day 9 192
01-701-1028 XANOMELINE ONCE 2013-07-28 2013-07-28 Day 10 216

Find First Dose

In this section we will find the first dose for each subject and drug, using derive_vars_merged(). We also create an analysis visit (AVISIT) based on NFRLT. The first dose datetime for an analyte FANLDTM is calculated as the minimum ADTM from the dosing records by subject and drug.

# ---- Find first dose per treatment per subject ----
# ---- Join with ADPC data and keep only subjects with dosing ----

adpc_first_dose <- pc_dates %>%
  derive_vars_merged(
    dataset_add = ex_exp,
    filter_add = (EXDOSE > 0 & !is.na(ADTM)),
    new_vars = exprs(FANLDTM = ADTM),
    order = exprs(ADTM, EXSEQ),
    mode = "first",
    by_vars = exprs(STUDYID, USUBJID, DRUG)
  ) %>%
  filter(!is.na(FANLDTM)) %>%
  # Derive AVISIT based on nominal relative time
  # Derive AVISITN to nominal time in whole days using integer division
  # Define AVISIT based on nominal day
  mutate(
    AVISITN = NFRLT %/% 24 + 1,
    AVISIT = paste("Day", AVISITN)
  )
USUBJID FANLDTM AVISIT ADTM PCTPT
01-701-1028 2013-07-19 Day 1 2013-07-18 23:30:00 Pre-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 00:05:00 5 Min Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 00:30:00 30 Min Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 01:00:00 1h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 01:30:00 1.5h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 02:00:00 2h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 04:00:00 4h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 06:00:00 6h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 08:00:00 8h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 12:00:00 12h Post-dose

Find Reference Dose Dates Corresponding to PK Records

Use derive_vars_joined() to find the previous dose data. This will join the expanded EX data with the ADPC based on the analysis date ADTM. Note the filter_join parameter. In addition to the date of the previous dose (ADTM_prev), we also keep the actual dose amount EXDOSE_prev and the analysis visit of the dose AVISIT_prev.

# ---- Find previous dose  ----

adpc_prev <- adpc_first_dose %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(ADTM),
    new_vars = exprs(
      ADTM_prev = ADTM, EXDOSE_prev = EXDOSE, AVISIT_prev = AVISIT,
      AENDTM_prev = AENDTM
    ),
    join_vars = exprs(ADTM),
    join_type = "all",
    filter_add = NULL,
    filter_join = ADTM > ADTM.join,
    mode = "last",
    check_type = "none"
  )
USUBJID VISIT ADTM PCTPT ADTM_prev EXDOSE_prev AVISIT_prev
01-701-1028 BASELINE 2013-07-18 23:30:00 Pre-dose NA NA NA
01-701-1028 BASELINE 2013-07-19 00:05:00 5 Min Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 00:30:00 30 Min Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 01:00:00 1h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 01:30:00 1.5h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 02:00:00 2h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 04:00:00 4h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 06:00:00 6h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 08:00:00 8h Post-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 12:00:00 12h Post-dose 2013-07-19 54 Day 1

Similarly, find next dose information using derive_vars_joined() with the filter_join parameter as ADTM <= ADTM.join. Here we keep the next dose analysis date ADTM_next, the next actual dose EXDOSE_next, and the next analysis visit AVISIT_next.

# ---- Find next dose  ----

adpc_next <- adpc_prev %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(ADTM),
    new_vars = exprs(
      ADTM_next = ADTM, EXDOSE_next = EXDOSE, AVISIT_next = AVISIT,
      AENDTM_next = AENDTM
    ),
    join_vars = exprs(ADTM),
    join_type = "all",
    filter_add = NULL,
    filter_join = ADTM <= ADTM.join,
    mode = "first",
    check_type = "none"
  )
USUBJID VISIT ADTM PCTPT ADTM_next EXDOSE_next AVISIT_next
01-701-1028 BASELINE 2013-07-18 23:30:00 Pre-dose 2013-07-19 54 Day 1
01-701-1028 BASELINE 2013-07-19 00:05:00 5 Min Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 00:30:00 30 Min Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 01:00:00 1h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 01:30:00 1.5h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 02:00:00 2h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 04:00:00 4h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 06:00:00 6h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 08:00:00 8h Post-dose 2013-07-20 54 Day 2
01-701-1028 BASELINE 2013-07-19 12:00:00 12h Post-dose 2013-07-20 54 Day 2

Use the same method to find the previous and next nominal times. Note that here the data are sorted by nominal time rather than the actual time. This will tell us when the previous dose and the next dose were supposed to occur. Sometimes this will differ from the actual times in a study. Here we keep the previous nominal dose time NFRLT_prev and the next nominal dose time NFRLT_next. Note that the filter_join parameter uses the nominal relative times, e.g. NFRLT > NFRLT.join.

# ---- Find previous nominal time ----

adpc_nom_prev <- adpc_next %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(NFRLT),
    new_vars = exprs(NFRLT_prev = NFRLT),
    join_vars = exprs(NFRLT),
    join_type = "all",
    filter_add = NULL,
    filter_join = NFRLT > NFRLT.join,
    mode = "last",
    check_type = "none"
  )

# ---- Find next nominal time ----

adpc_nom_next <- adpc_nom_prev %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(NFRLT),
    new_vars = exprs(NFRLT_next = NFRLT),
    join_vars = exprs(NFRLT),
    join_type = "all",
    filter_add = NULL,
    filter_join = NFRLT <= NFRLT.join,
    mode = "first",
    check_type = "none"
  )
USUBJID NFRLT PCTPT NFRLT_prev NFRLT_next
01-701-1028 0.00 Pre-dose NA 0
01-701-1028 0.08 5 Min Post-dose 0 24
01-701-1028 0.50 30 Min Post-dose 0 24
01-701-1028 1.00 1h Post-dose 0 24
01-701-1028 1.50 1.5h Post-dose 0 24
01-701-1028 2.00 2h Post-dose 0 24
01-701-1028 4.00 4h Post-dose 0 24
01-701-1028 6.00 6h Post-dose 0 24
01-701-1028 8.00 8h Post-dose 0 24
01-701-1028 12.00 12h Post-dose 0 24

Combine PC and EX Records and Derive Relative Time Variables

Combine PC and EX records and derive the additional relative time variables. Often NCA data will keep both dosing and concentration records. We will keep both here. Sometimes you will see ADPC with only the concentration records. If this is desired, the dosing records can be dropped before saving the final dataset. We will use the {admiral} function derive_vars_duration() to calculate the actual relative time from first dose (AFRLT) and the actual relative time from most recent dose (ARRLT). Note that we use the parameter add_one = FALSE here. We will also create a variable representing actual time to next dose (AXRLT) which is not kept, but will be used when we create duplicated records for analysis for the pre-dose records. For now, we will update missing values of ARRLT corresponding to the pre-dose records with AXRLT, and dosing records will be set to zero.

We also calculate the reference dates FANLDTM (First Datetime of Dose for Analyte) and PCRFTDTM (Reference Datetime of Dose for Analyte) and their corresponding date and time variables.

We calculate the maximum date for concentration records and only keep the dosing records up to that date.

# ---- Combine ADPC and EX data ----
# Derive Relative Time Variables

adpc_arrlt <- bind_rows(adpc_nom_next, ex_exp) %>%
  group_by(USUBJID, DRUG) %>%
  mutate(
    FANLDTM = min(FANLDTM, na.rm = TRUE),
    min_NFRLT = min(NFRLT_prev, na.rm = TRUE),
    maxdate = max(ADT[EVID == 0], na.rm = TRUE), .after = USUBJID
  ) %>%
  arrange(USUBJID, ADTM) %>%
  ungroup() %>%
  filter(ADT <= maxdate) %>%
  # Derive Actual Relative Time from First Dose (AFRLT)
  derive_vars_duration(
    new_var = AFRLT,
    start_date = FANLDTM,
    end_date = ADTM,
    out_unit = "hours",
    floor_in = FALSE,
    add_one = FALSE
  ) %>%
  # Derive Actual Relative Time from Reference Dose (ARRLT)
  derive_vars_duration(
    new_var = ARRLT,
    start_date = ADTM_prev,
    end_date = ADTM,
    out_unit = "hours",
    floor_in = FALSE,
    add_one = FALSE
  ) %>%
  # Derive Actual Relative Time from Next Dose (AXRLT not kept)
  derive_vars_duration(
    new_var = AXRLT,
    start_date = ADTM_next,
    end_date = ADTM,
    out_unit = "hours",
    floor_in = FALSE,
    add_one = FALSE
  ) %>%
  mutate(
    ARRLT = case_when(
      EVID == 1 ~ 0,
      is.na(ARRLT) ~ AXRLT,
      TRUE ~ ARRLT
    ),

    # Derive Reference Dose Date
    PCRFTDTM = case_when(
      EVID == 1 ~ ADTM,
      is.na(ADTM_prev) ~ ADTM_next,
      TRUE ~ ADTM_prev
    )
  ) %>%
  # Derive dates and times from datetimes
  derive_vars_dtm_to_dt(exprs(FANLDTM)) %>%
  derive_vars_dtm_to_tm(exprs(FANLDTM)) %>%
  derive_vars_dtm_to_dt(exprs(PCRFTDTM)) %>%
  derive_vars_dtm_to_tm(exprs(PCRFTDTM))
USUBJID FANLDTM AVISIT PCTPT AFRLT ARRLT AXRLT
01-701-1028 2013-07-19 Day 1 Pre-dose -0.5000000 -0.5000000 -0.50000
01-701-1028 2013-07-19 Day 1 NA 0.0000000 0.0000000 NA
01-701-1028 2013-07-19 Day 1 5 Min Post-dose 0.0833333 0.0833333 -23.91667
01-701-1028 2013-07-19 Day 1 30 Min Post-dose 0.5000000 0.5000000 -23.50000
01-701-1028 2013-07-19 Day 1 1h Post-dose 1.0000000 1.0000000 -23.00000
01-701-1028 2013-07-19 Day 1 1.5h Post-dose 1.5000000 1.5000000 -22.50000
01-701-1028 2013-07-19 Day 1 2h Post-dose 2.0000000 2.0000000 -22.00000
01-701-1028 2013-07-19 Day 1 4h Post-dose 4.0000000 4.0000000 -20.00000
01-701-1028 2013-07-19 Day 1 6h Post-dose 6.0000000 6.0000000 -18.00000
01-701-1028 2013-07-19 Day 1 0-6h Post-dose 6.0000000 6.0000000 -18.00000

For nominal relative times we calculate NRRLT generally as NFRLT - NFRLT_prev and NXRLT as NFRLT - NFRLT_next.

adpc_nrrlt <- adpc_arrlt %>%
  # Derive Nominal Relative Time from Reference Dose (NRRLT)
  mutate(
    NRRLT = case_when(
      EVID == 1 ~ 0,
      is.na(NFRLT_prev) ~ NFRLT - min_NFRLT,
      TRUE ~ NFRLT - NFRLT_prev
    ),
    NXRLT = case_when(
      EVID == 1 ~ 0,
      TRUE ~ NFRLT - NFRLT_next
    )
  )
USUBJID AVISIT PCTPT NFRLT NRRLT NXRLT
01-701-1028 Day 1 Pre-dose 0.00 0.00 0.00
01-701-1028 Day 1 NA 0.00 0.00 0.00
01-701-1028 Day 1 5 Min Post-dose 0.08 0.08 -23.92
01-701-1028 Day 1 30 Min Post-dose 0.50 0.50 -23.50
01-701-1028 Day 1 1h Post-dose 1.00 1.00 -23.00
01-701-1028 Day 1 1.5h Post-dose 1.50 1.50 -22.50
01-701-1028 Day 1 2h Post-dose 2.00 2.00 -22.00
01-701-1028 Day 1 4h Post-dose 4.00 4.00 -20.00
01-701-1028 Day 1 6h Post-dose 6.00 6.00 -18.00
01-701-1028 Day 1 0-6h Post-dose 3.00 3.00 -21.00

Derive Analysis Variables

Using dplyr::mutate we derive a number of analysis variables including analysis value (AVAL), analysis time point (ATPT) analysis timepoint reference (ATPTREF) and baseline type (BASETYPE).

We set ATPT to PCTPT for concentration records and to “Dose” for dosing records. The analysis timepoint reference ATPTREF will correspond to the dosing visit. We will use AVISIT_prev and AVISIT_next to derive. The baseline type will be a concatenation of ATPTREF and “Baseline” with values such as “Day 1 Baseline”, “Day 2 Baseline”, etc. The baseline flag ABLFL will be set to “Y” for pre-dose records.

Analysis value AVAL in this example comes from PCSTRESN for concentration records. In addition we are including the dose value EXDOSE for dosing records and setting BLQ (Below Limit of Quantitation) records to 0 before the first dose and to 1/2 of LLOQ (Lower Limit of Quantitation) for records after first dose. (Additional tests such as whether more than 1/3 of records are BLQ may be required and are not done in this example.) We also create a listing-ready variable AVALCAT1 which includes the “BLQ” record indicator and formats the numeric values to three significant digits.

We derive actual dose DOSEA based on EXDOSE_prev and EXDOSE_next and planned dose DOSEP based on the planned treatment TRT01P. In addition we add the units for the dose variables and the relative time variables.

# ---- Derive Analysis Variables ----
# Derive ATPTN, ATPT, ATPTREF, ABLFL and BASETYPE
# Derive planned dose DOSEP, actual dose DOSEA and units
# Derive PARAMCD and relative time units
# Derive AVAL, AVALU and AVALCAT1

adpc_aval <- adpc_nrrlt %>%
  mutate(
    PARCAT1 = PCSPEC,
    ATPTN = case_when(
      EVID == 1 ~ 0,
      TRUE ~ PCTPTNUM
    ),
    ATPT = case_when(
      EVID == 1 ~ "Dose",
      TRUE ~ PCTPT
    ),
    ATPTREF = case_when(
      EVID == 1 ~ AVISIT,
      is.na(AVISIT_prev) ~ AVISIT_next,
      TRUE ~ AVISIT_prev
    ),
    # Derive baseline flag for pre-dose records
    ABLFL = case_when(
      ATPT == "Pre-dose" ~ "Y",
      TRUE ~ NA_character_
    ),
    # Derive BASETYPE
    BASETYPE = paste(ATPTREF, "Baseline"),

    # Derive Actual Dose
    DOSEA = case_when(
      EVID == 1 ~ EXDOSE,
      is.na(EXDOSE_prev) ~ EXDOSE_next,
      TRUE ~ EXDOSE_prev
    ),
    # Derive Planned Dose
    DOSEP = case_when(
      TRT01P == "Xanomeline High Dose" ~ 81,
      TRT01P == "Xanomeline Low Dose" ~ 54
    ),
    DOSEU = "mg",
  ) %>%
  # Derive relative time units
  mutate(
    FRLTU = "h",
    RRLTU = "h",
    # Derive PARAMCD
    PARAMCD = coalesce(PCTESTCD, "DOSE"),
    ALLOQ = PCLLOQ,
    # Derive AVAL
    AVAL = case_when(
      EVID == 1 ~ EXDOSE,
      PCSTRESC == "<BLQ" & NFRLT == 0 ~ 0,
      PCSTRESC == "<BLQ" & NFRLT > 0 ~ 0.5 * ALLOQ,
      TRUE ~ PCSTRESN
    ),
    AVALU = case_when(
      EVID == 1 ~ EXDOSU,
      TRUE ~ PCSTRESU
    ),
    AVALCAT1 = if_else(PCSTRESC == "<BLQ", PCSTRESC, prettyNum(signif(AVAL, digits = 3))),
  ) %>%
  # Add SRCSEQ
  mutate(
    SRCDOM = DOMAIN,
    SRCVAR = "SEQ",
    SRCSEQ = coalesce(PCSEQ, EXSEQ)
  )
USUBJID NFRLT AVISIT ATPT ABLFL ATPTREF AVAL AVALCAT1
01-701-1028 0.00 Day 1 Pre-dose Y Day 1 0.0000000 <BLQ
01-701-1028 0.00 Day 1 Dose NA Day 1 54.0000000 NA
01-701-1028 0.08 Day 1 5 Min Post-dose NA Day 1 0.1015662 0.102
01-701-1028 0.50 Day 1 30 Min Post-dose NA Day 1 0.5469018 0.547
01-701-1028 1.00 Day 1 1h Post-dose NA Day 1 0.9254654 0.925
01-701-1028 1.50 Day 1 1.5h Post-dose NA Day 1 1.1875059 1.19
01-701-1028 2.00 Day 1 2h Post-dose NA Day 1 1.3688894 1.37
01-701-1028 4.00 Day 1 4h Post-dose NA Day 1 1.6831476 1.68
01-701-1028 6.00 Day 1 6h Post-dose NA Day 1 1.7552923 1.76
01-701-1028 3.00 Day 1 0-6h Post-dose NA Day 1 24.9423721 24.9

Create Duplicated Records for Analysis

As mentioned above, the CDISC ADaM Implementation Guide for Non-compartmental Analysis uses duplicated records for analysis when a record needs to be used in more than one way. In this example the 24 hour post-dose record will also be used a the pre-dose record for the “Day 2” dose. In addition to 24 hour post-dose records, other situations may include pre-dose records for “Cycle 2 Day 1”, etc.

In general, we will select the records of interest and then update the relative time variables for the duplicated records. In this case we will select where the nominal relative time to next dose is zero. (Note that we do not need to duplicate the first dose record since there is no prior dose.)

DTYPE is set to “COPY” for the duplicated records and the original PCSEQ value is retained. In this case we change “24h Post-dose” to “Pre-dose”. ABLFL is set to “Y” since these records will serve as baseline for the “Day 2” dose. DOSEA is set to EXDOSE_next and PCRFTDTM is set to ADTM_next.

# ---- Create DTYPE copy records ----

dtype <- adpc_aval %>%
  filter(NFRLT > 0 & NXRLT == 0 & EVID == 0 & !is.na(AVISIT_next)) %>%
  select(-PCRFTDT, -PCRFTTM) %>%
  # Re-derive variables in for DTYPE copy records
  mutate(
    ABLFL = NA_character_,
    ATPTREF = AVISIT_next,
    ARRLT = AXRLT,
    NRRLT = NXRLT,
    PCRFTDTM = ADTM_next,
    DOSEA = EXDOSE_next,
    BASETYPE = paste(AVISIT_next, "Baseline"),
    ATPT = "Pre-dose",
    ATPTN = -0.5,
    ABLFL = "Y",
    DTYPE = "COPY"
  ) %>%
  derive_vars_dtm_to_dt(exprs(PCRFTDTM)) %>%
  derive_vars_dtm_to_tm(exprs(PCRFTDTM))
USUBJID DTYPE ATPT NFRLT NRRLT AFRLT ARRLT BASETYPE
01-701-1028 COPY Pre-dose 24 0 24 0 Day 2 Baseline
01-701-1028 COPY Pre-dose 48 0 48 0 Day 3 Baseline
01-701-1033 COPY Pre-dose 24 0 24 0 Day 2 Baseline
01-701-1033 COPY Pre-dose 48 0 48 0 Day 3 Baseline
01-701-1442 COPY Pre-dose 24 0 24 0 Day 2 Baseline
01-701-1442 COPY Pre-dose 48 0 48 0 Day 3 Baseline
01-714-1288 COPY Pre-dose 24 0 24 0 Day 2 Baseline
01-714-1288 COPY Pre-dose 48 0 48 0 Day 3 Baseline
01-718-1101 COPY Pre-dose 24 0 24 0 Day 2 Baseline
01-718-1101 COPY Pre-dose 48 0 48 0 Day 3 Baseline

Combine ADPC data with Duplicated Records

Now the duplicated records are combined with the original records. We also derive the modified relative time from reference dose MRRLT. In this case, negative values of ARRLT are set to zero.

This is also an opportunity to derive analysis flags e.g. ANL01FL , ANL02FL etc. In this example ANL01FL is set to “Y” for all records and ANL02FL is set to “Y” for all records except the duplicated records with DTYPE = “COPY”. Additional flags may be used to select full profile records and/or to select records included in the tables and figures, etc.

# ---- Combine original records and DTYPE copy records ----

adpc_dtype <- bind_rows(adpc_aval, dtype) %>%
  arrange(STUDYID, USUBJID, BASETYPE, ADTM, NFRLT) %>%
  mutate(
    # Derive MRRLT, ANL01FL and ANL02FL
    MRRLT = if_else(ARRLT < 0, 0, ARRLT),
    ANL01FL = "Y",
    ANL02FL = if_else(is.na(DTYPE), "Y", NA_character_),
  )
STUDYID USUBJID BASETYPE ADTM ATPT NFRLT NRRLT ARRLT MRRLT
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-18 23:30:00 Pre-dose 0.00 0.00 -0.5000000 0.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 00:00:00 Dose 0.00 0.00 0.0000000 0.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 00:05:00 5 Min Post-dose 0.08 0.08 0.0833333 0.0833333
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 00:30:00 30 Min Post-dose 0.50 0.50 0.5000000 0.5000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 01:00:00 1h Post-dose 1.00 1.00 1.0000000 1.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 01:30:00 1.5h Post-dose 1.50 1.50 1.5000000 1.5000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 02:00:00 2h Post-dose 2.00 2.00 2.0000000 2.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 04:00:00 4h Post-dose 4.00 4.00 4.0000000 4.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 06:00:00 0-6h Post-dose 3.00 3.00 6.0000000 6.0000000
CDISCPILOT01 01-701-1028 Day 1 Baseline 2013-07-19 06:00:00 6h Post-dose 6.00 6.00 6.0000000 6.0000000

Calculate Change from Baseline and Assign ASEQ

The {admiral} function derive_var_base() is used to derive BASE and the function derive_var_chg() is used to derive change from baseline CHG.

We also now derive ASEQ using derive_var_obs_number() and we drop intermediate variables such as those ending with “_prev” and “_next”.

Finally we derive PARAM and PARAMN from a lookup table.

# ---- Derive BASE and Calculate Change from Baseline ----

adpc_base <- adpc_dtype %>%
  # Derive BASE
  derive_var_base(
    by_vars = exprs(STUDYID, USUBJID, PARAMCD, PARCAT1, BASETYPE),
    source_var = AVAL,
    new_var = BASE,
    filter = ABLFL == "Y"
  )

adpc_chg <- derive_var_chg(adpc_base)

# ---- Add ASEQ ----

adpc_aseq <- adpc_chg %>%
  # Calculate ASEQ
  derive_var_obs_number(
    new_var = ASEQ,
    by_vars = exprs(STUDYID, USUBJID),
    order = exprs(ADTM, BASETYPE, EVID, AVISITN, ATPTN, PARCAT1, DTYPE),
    check_type = "error"
  ) %>%
  # Remove temporary variables
  select(
    -DOMAIN, -PCSEQ, -starts_with("orig"), -starts_with("min"),
    -starts_with("max"), -starts_with("EX"), -ends_with("next"),
    -ends_with("prev"), -DRUG, -EVID, -AXRLT, -NXRLT, -VISITDY
  ) %>%
  # Derive PARAM and PARAMN
  derive_vars_merged(
    dataset_add = select(param_lookup, -PCTESTCD), by_vars = exprs(PARAMCD)
  )
USUBJID BASETYPE DTYPE AVISIT ATPT AVAL NFRLT NRRLT AFRLT ARRLT BASE CHG
01-701-1028 Day 1 Baseline NA Day 1 Pre-dose 0.0000000 0.00 0.00 -0.5000000 -0.5000000 0 0.0000000
01-701-1028 Day 1 Baseline NA Day 1 Dose 54.0000000 0.00 0.00 0.0000000 0.0000000 NA NA
01-701-1028 Day 1 Baseline NA Day 1 5 Min Post-dose 0.1015662 0.08 0.08 0.0833333 0.0833333 0 0.1015662
01-701-1028 Day 1 Baseline NA Day 1 30 Min Post-dose 0.5469018 0.50 0.50 0.5000000 0.5000000 0 0.5469018
01-701-1028 Day 1 Baseline NA Day 1 1h Post-dose 0.9254654 1.00 1.00 1.0000000 1.0000000 0 0.9254654
01-701-1028 Day 1 Baseline NA Day 1 1.5h Post-dose 1.1875059 1.50 1.50 1.5000000 1.5000000 0 1.1875059
01-701-1028 Day 1 Baseline NA Day 1 2h Post-dose 1.3688894 2.00 2.00 2.0000000 2.0000000 0 1.3688894
01-701-1028 Day 1 Baseline NA Day 1 4h Post-dose 1.6831476 4.00 4.00 4.0000000 4.0000000 0 1.6831476
01-701-1028 Day 1 Baseline NA Day 1 0-6h Post-dose 24.9423721 3.00 3.00 6.0000000 6.0000000 NA NA
01-701-1028 Day 1 Baseline NA Day 1 6h Post-dose 1.7552923 6.00 6.00 6.0000000 6.0000000 0 1.7552923

Add Additional Baseline Variables

Here we derive additional baseline values from VS for baseline height HTBL and weight WTBL and compute the body mass index (BMI) with compute_bmi(). These values could also be obtained from ADVS if available. Baseline lab values could also be derived from LB or ADLB in a similar manner.

# Derive additional baselines from VS
adpc_baselines <- adpc_aseq %>%
  derive_vars_merged(
    dataset_add = vs,
    filter_add = VSTESTCD == "HEIGHT",
    by_vars = exprs(STUDYID, USUBJID),
    new_vars = exprs(HTBL = VSSTRESN, HTBLU = VSSTRESU)
  ) %>%
  derive_vars_merged(
    dataset_add = vs,
    filter_add = VSTESTCD == "WEIGHT" & VSBLFL == "Y",
    by_vars = exprs(STUDYID, USUBJID),
    new_vars = exprs(WTBL = VSSTRESN, WTBLU = VSSTRESU)
  ) %>%
  mutate(
    BMIBL = compute_bmi(height = HTBL, weight = WTBL),
    BMIBLU = "kg/m^2"
  )
USUBJID HTBL HTBLU WTBL WTBLU BMIBL BMIBLU BASETYPE ATPT AVAL
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline Pre-dose 0.0000000
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline Dose 54.0000000
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 5 Min Post-dose 0.1015662
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 30 Min Post-dose 0.5469018
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 1h Post-dose 0.9254654
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 1.5h Post-dose 1.1875059
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 2h Post-dose 1.3688894
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 4h Post-dose 1.6831476
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 0-6h Post-dose 24.9423721
01-701-1028 177.8 cm 99.34 kg 31.42394 kg/m^2 Day 1 Baseline 6h Post-dose 1.7552923

Add the ADSL variables

If needed, the other ADSL variables can now be added:

# Add all ADSL variables
adpc <- adpc_baselines %>%
  derive_vars_merged(
    dataset_add = select(adsl, !!!negate_vars(adsl_vars)),
    by_vars = exprs(STUDYID, USUBJID)
  )

Adding attributes to the ADPC file will be discussed below. We will now turn to the Population PK example.

Programming Population PK (ADPPK) Analysis Data

The Population PK Analysis Data (ADPPK) follows the CDISC Implementation Guide (https://www.cdisc.org/standards/foundational/adam/basic-data-structure-adam-poppk-implementation-guide-v1-0). The programming workflow for Population PK (ADPPK) Analysis Data is similar to the NCA Programming flow with a few key differences. Population PK models generally make use of nonlinear mixed effects models that require numeric variables. The data used in the models will include both dosing and concentration records, relative time variables, and numeric covariate variables. A DV or dependent variable is often expected. This is equivalent to the ADaM AVAL variable and will be included in addition to AVAL for ADPPK. The ADPPK file will not have the duplicated records for analysis found in the NCA.

Here are the relative time variables we will use for the ADPPK data. These correspond to the names in the forthcoming CDISC Implementation Guide.

Variable Variable Label
NFRLT Nominal Rel Time from First Dose
AFRLT Actual Rel Time from First Dose
NPRLT Nominal Rel Time from Previous Dose
APRLT Actual Rel Time from Previous Dose

The ADPPK will require the numeric Event ID (EVID) which we defined in ADPC but did not keep.

ADPPK Programming Workflow

Find First Dose ADPPK

The initial programming steps for ADPPK will follow the same sequence as the ADPC. This includes reading in the {pharmaversesdtm} data, deriving analysis dates, defining the nominal relative time from first dose NFRLT, and expanding dosing records. For more detail see these steps above (Read in Data).

We will pick this up at the stage where we find the first dose for the concentration records. We will use derive_vars_merged() as we did for ADPC.

# ---- Find first dose per treatment per subject ----
# ---- Join with ADPC data and keep only subjects with dosing ----

adppk_first_dose <- pc_dates %>%
  derive_vars_merged(
    dataset_add = ex_exp,
    filter_add = (!is.na(ADTM)),
    new_vars = exprs(FANLDTM = ADTM, EXDOSE_first = EXDOSE),
    order = exprs(ADTM, EXSEQ),
    mode = "first",
    by_vars = exprs(STUDYID, USUBJID, DRUG)
  ) %>%
  filter(!is.na(FANLDTM)) %>%
  # Derive AVISIT based on nominal relative time
  # Derive AVISITN to nominal time in whole days using integer division
  # Define AVISIT based on nominal day
  mutate(
    AVISITN = NFRLT %/% 24 + 1,
    AVISIT = paste("Day", AVISITN),
  )
USUBJID FANLDTM AVISIT ADTM PCTPT
01-701-1028 2013-07-19 Day 1 2013-07-18 23:30:00 Pre-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 00:05:00 5 Min Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 00:30:00 30 Min Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 01:00:00 1h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 01:30:00 1.5h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 02:00:00 2h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 04:00:00 4h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 06:00:00 6h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 08:00:00 8h Post-dose
01-701-1028 2013-07-19 Day 1 2013-07-19 12:00:00 12h Post-dose

Find Previous Dose

For ADPPK we will find the previous dose with respect to actual time and nominal time. We will use derive_vars_joined() as we did for ADPC, but note that we will not need to find the next dose as for ADPC.

# ---- Find previous dose  ----

adppk_prev <- adppk_first_dose %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(ADTM),
    new_vars = exprs(
      ADTM_prev = ADTM, EXDOSE_prev = EXDOSE, AVISIT_prev = AVISIT,
      AENDTM_prev = AENDTM
    ),
    join_vars = exprs(ADTM),
    join_type = "all",
    filter_add = NULL,
    filter_join = ADTM > ADTM.join,
    mode = "last",
    check_type = "none"
  )

# ---- Find previous nominal dose ----

adppk_nom_prev <- adppk_prev %>%
  derive_vars_joined(
    dataset_add = ex_exp,
    by_vars = exprs(USUBJID),
    order = exprs(NFRLT),
    new_vars = exprs(NFRLT_prev = NFRLT),
    join_vars = exprs(NFRLT),
    join_type = "all",
    filter_add = NULL,
    filter_join = NFRLT > NFRLT.join,
    mode = "last",
    check_type = "none"
  )
USUBJID VISIT ADTM PCTPT ADTM_prev NFRLT_prev
01-701-1028 BASELINE 2013-07-18 23:30:00 Pre-dose NA NA
01-701-1028 BASELINE 2013-07-19 00:05:00 5 Min Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 00:30:00 30 Min Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 01:00:00 1h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 01:30:00 1.5h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 02:00:00 2h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 04:00:00 4h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 06:00:00 6h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 08:00:00 8h Post-dose 2013-07-19 0
01-701-1028 BASELINE 2013-07-19 12:00:00 12h Post-dose 2013-07-19 0

Combine PC and EX Records for ADPPK

As we did for ADPC we will now combine PC and EX records. We will derive the relative time variables AFRLT (Actual Relative Time from First Dose), APRLT (Actual Relative Time from Previous Dose), and NPRLT (Nominal Relative Time from Previous Dose). Use derive_vars_duration() to derive AFRLT and APRLT. Note we defined EVID above with values of 0 for observation records and 1 for dosing records.

# ---- Combine ADPPK and EX data ----
# Derive Relative Time Variables

adppk_aprlt <- bind_rows(adppk_nom_prev, ex_exp) %>%
  group_by(USUBJID, DRUG) %>%
  mutate(
    FANLDTM = min(FANLDTM, na.rm = TRUE),
    min_NFRLT = min(NFRLT, na.rm = TRUE),
    maxdate = max(ADT[EVID == 0], na.rm = TRUE), .after = USUBJID
  ) %>%
  arrange(USUBJID, ADTM) %>%
  ungroup() %>%
  filter(ADT <= maxdate) %>%
  # Derive Actual Relative Time from First Dose (AFRLT)
  derive_vars_duration(
    new_var = AFRLT,
    start_date = FANLDTM,
    end_date = ADTM,
    out_unit = "hours",
    floor_in = FALSE,
    add_one = FALSE
  ) %>%
  # Derive Actual Relative Time from Reference Dose (APRLT)
  derive_vars_duration(
    new_var = APRLT,
    start_date = ADTM_prev,
    end_date = ADTM,
    out_unit = "hours",
    floor_in = FALSE,
    add_one = FALSE
  ) %>%
  # Derive APRLT
  mutate(
    APRLT = case_when(
      EVID == 1 ~ 0,
      is.na(APRLT) ~ AFRLT,
      TRUE ~ APRLT
    ),
    NPRLT = case_when(
      EVID == 1 ~ 0,
      is.na(NFRLT_prev) ~ NFRLT - min_NFRLT,
      TRUE ~ NFRLT - NFRLT_prev
    )
  )
USUBJID EVID NFRLT AFRLT APRLT NPRLT
01-701-1028 0 0.00 -0.5000000 -0.5000000 0.00
01-701-1028 1 0.00 0.0000000 0.0000000 0.00
01-701-1028 0 0.08 0.0833333 0.0833333 0.08
01-701-1028 0 0.50 0.5000000 0.5000000 0.50
01-701-1028 0 1.00 1.0000000 1.0000000 1.00
01-701-1028 0 1.50 1.5000000 1.5000000 1.50
01-701-1028 0 2.00 2.0000000 2.0000000 2.00
01-701-1028 0 4.00 4.0000000 4.0000000 4.00
01-701-1028 0 6.00 6.0000000 6.0000000 6.00
01-701-1028 0 3.00 6.0000000 6.0000000 3.00

Derive Analysis Variables and Dependent Variable DV

The expected analysis variable for ADPPK is DV or dependent variable. For this example DV is set to the numeric concentration value PCSTRESN. We will also include AVAL equivalent to DV for consistency with CDISC ADaM standards. MDV missing dependent variable will also be included.

# ---- Derive Analysis Variables ----
# Derive actual dose DOSEA and planned dose DOSEP,
# Derive AVAL and DV

adppk_aval <- adppk_aprlt %>%
  mutate(
    # Derive Actual Dose
    DOSEA = case_when(
      EVID == 1 ~ EXDOSE,
      is.na(EXDOSE_prev) ~ EXDOSE_first,
      TRUE ~ EXDOSE_prev
    ),
    # Derive Planned Dose
    DOSEP = case_when(
      TRT01P == "Xanomeline High Dose" ~ 81,
      TRT01P == "Xanomeline Low Dose" ~ 54,
      TRT01P == "Placebo" ~ 0
    ),
    # Derive PARAMCD
    PARAMCD = case_when(
      EVID == 1 ~ "DOSE",
      TRUE ~ PCTESTCD
    ),
    ALLOQ = PCLLOQ,
    # Derive CMT
    CMT = case_when(
      EVID == 1 ~ 1,
      PCSPEC == "PLASMA" ~ 2,
      TRUE ~ 3
    ),
    # Derive BLQFL/BLQFN
    BLQFL = case_when(
      PCSTRESC == "<BLQ" ~ "Y",
      TRUE ~ "N"
    ),
    BLQFN = case_when(
      PCSTRESC == "<BLQ" ~ 1,
      TRUE ~ 0
    ),
    AMT = case_when(
      EVID == 1 ~ EXDOSE,
      TRUE ~ NA_real_
    ),
    # Derive DV and AVAL
    DV = PCSTRESN,
    AVAL = DV,
    DVL = case_when(
      DV != 0 ~ log(DV),
      TRUE ~ NA_real_
    ),
    # Derive MDV
    MDV = case_when(
      EVID == 1 ~ 1,
      is.na(DV) ~ 1,
      TRUE ~ 0
    ),
    AVALU = case_when(
      EVID == 1 ~ NA_character_,
      TRUE ~ PCSTRESU
    ),
    UDTC = format_ISO8601(ADTM),
    II = if_else(EVID == 1, 1, 0),
    SS = if_else(EVID == 1, 1, 0)
  )
USUBJID EVID DOSEA AMT NFRLT AFRLT CMT DV MDV BLQFN
01-701-1028 0 54 NA 0.00 -0.5000000 2 0.0000000 0 1
01-701-1028 1 54 54 0.00 0.0000000 1 NA 1 0
01-701-1028 0 54 NA 0.08 0.0833333 2 0.1015662 0 0
01-701-1028 0 54 NA 0.50 0.5000000 2 0.5469018 0 0
01-701-1028 0 54 NA 1.00 1.0000000 2 0.9254654 0 0
01-701-1028 0 54 NA 1.50 1.5000000 2 1.1875059 0 0
01-701-1028 0 54 NA 2.00 2.0000000 2 1.3688894 0 0
01-701-1028 0 54 NA 4.00 4.0000000 2 1.6831476 0 0
01-701-1028 0 54 NA 6.00 6.0000000 2 1.7552923 0 0
01-701-1028 0 54 NA 3.00 6.0000000 3 24.9423721 0 0

Add ASEQ and Remove Temporary Variables

We derive ASEQ using derive_var_obs_number(). We add a PROJID based on drug and include the numeric version PROJIDN, and we drop and we drop intermediate variables such as those ending with “_prev”.

# ---- Add ASEQ ----

adppk_aseq <- adppk_aval %>%
  # Calculate ASEQ
  derive_var_obs_number(
    new_var = ASEQ,
    by_vars = exprs(STUDYID, USUBJID),
    order = exprs(AFRLT, EVID, CMT),
    check_type = "error"
  ) %>%
  # Derive PARAM and PARAMN
  derive_vars_merged(dataset_add = select(param_lookup, -PCTESTCD), by_vars = exprs(PARAMCD)) %>%
  mutate(
    PROJID = DRUG,
    PROJIDN = 1
  ) %>%
  # Remove temporary variables
  select(
    -DOMAIN, -starts_with("min"), -starts_with("max"), -starts_with("EX"),
    -starts_with("PC"), -ends_with("first"), -ends_with("prev"),
    -ends_with("DTM"), -ends_with("DT"), -ends_with("TM"), -starts_with("VISIT"),
    -starts_with("AVISIT"), -ends_with("TMF"), -starts_with("TRT"),
    -starts_with("ATPT"), -DRUG
  )
USUBJID EVID DOSEA AMT NFRLT AFRLT CMT DV MDV BLQFN ASEQ
01-701-1028 0 54 NA 0.00 -0.5000000 2 0.0000000 0 1 1
01-701-1028 1 54 54 0.00 0.0000000 1 NA 1 0 2
01-701-1028 0 54 NA 0.08 0.0833333 2 0.1015662 0 0 3
01-701-1028 0 54 NA 0.50 0.5000000 2 0.5469018 0 0 4
01-701-1028 0 54 NA 1.00 1.0000000 2 0.9254654 0 0 5
01-701-1028 0 54 NA 1.50 1.5000000 2 1.1875059 0 0 6
01-701-1028 0 54 NA 2.00 2.0000000 2 1.3688894 0 0 7
01-701-1028 0 54 NA 4.00 4.0000000 2 1.6831476 0 0 8
01-701-1028 0 54 NA 6.00 6.0000000 2 1.7552923 0 0 9
01-701-1028 0 54 NA 3.00 6.0000000 3 24.9423721 0 0 10

Derive Numeric Covariates

A key feature of Population PK modeling is the presence of numeric covariates. We will create numeric versions of many of our standard CDISC demographic variables including STUDYIDN, USUBJIDN, SEXN, RACEN, and ETHNICN.

#---- Derive Covariates ----
# Include numeric values for STUDYIDN, USUBJIDN, SEXN, RACEN etc.

covar <- adsl %>%
  derive_vars_merged(
    dataset_add = country_code_lookup,
    new_vars = exprs(COUNTRYN = country_number, COUNTRYL = country_name),
    by_vars = exprs(COUNTRY = country_code),
  ) %>%
  mutate(
    STUDYIDN = as.numeric(word(USUBJID, 1, sep = fixed("-"))),
    SITEIDN = as.numeric(word(USUBJID, 2, sep = fixed("-"))),
    USUBJIDN = as.numeric(word(USUBJID, 3, sep = fixed("-"))),
    SUBJIDN = as.numeric(SUBJID),
    SEXN = case_when(
      SEX == "M" ~ 1,
      SEX == "F" ~ 2,
      TRUE ~ 3
    ),
    RACEN = case_when(
      RACE == "AMERICAN INDIAN OR ALASKA NATIVE" ~ 1,
      RACE == "ASIAN" ~ 2,
      RACE == "BLACK OR AFRICAN AMERICAN" ~ 3,
      RACE == "NATIVE HAWAIIAN OR OTHER PACIFIC ISLANDER" ~ 4,
      RACE == "WHITE" ~ 5,
      TRUE ~ 6
    ),
    ETHNICN = case_when(
      ETHNIC == "HISPANIC OR LATINO" ~ 1,
      ETHNIC == "NOT HISPANIC OR LATINO" ~ 2,
      TRUE ~ 3
    ),
    ARMN = case_when(
      ARM == "Placebo" ~ 0,
      ARM == "Xanomeline Low Dose" ~ 1,
      ARM == "Xanomeline High Dose" ~ 2,
      TRUE ~ 3
    ),
    ACTARMN = case_when(
      ACTARM == "Placebo" ~ 0,
      ACTARM == "Xanomeline Low Dose" ~ 1,
      ACTARM == "Xanomeline High Dose" ~ 2,
      TRUE ~ 3
    ),
    COHORT = ARMN,
    COHORTC = ARM,
    ROUTE = unique(ex$EXROUTE),
    ROUTEN = case_when(
      ROUTE == "TRANSDERMAL" ~ 3,
      TRUE ~ NA_real_
    ),
    FORM = unique(ex$EXDOSFRM),
    FORMN = case_when(
      FORM == "PATCH" ~ 3,
      TRUE ~ 4
    )
  ) %>%
  select(
    STUDYID, STUDYIDN, SITEID, SITEIDN, USUBJID, USUBJIDN,
    SUBJID, SUBJIDN, AGE, SEX, SEXN, COHORT, COHORTC, ROUTE, ROUTEN,
    RACE, RACEN, ETHNIC, ETHNICN, FORM, FORMN, COUNTRY, COUNTRYN, COUNTRYL
  )
STUDYIDN USUBJIDN SITEIDN COUNTRY COUNTRYN AGE SEXN RACEN COHORT ROUTEN
1 1015 701 USA 235 63 2 5 0 3
1 1023 701 USA 235 64 1 5 0 3
1 1028 701 USA 235 71 1 5 2 3
1 1033 701 USA 235 74 1 5 1 3
1 1034 701 USA 235 77 2 5 2 3
1 1047 701 USA 235 85 2 5 0 3
1 1057 701 USA 235 59 2 5 3 3
1 1097 701 USA 235 68 1 5 1 3
1 1111 701 USA 235 81 2 5 1 3
1 1115 701 USA 235 84 1 5 1 3

Derive Additional Covariates from VS and LB

We will add additional covariates for baseline height HTBL and weight WTBL from VS and select baseline lab values CREATBL, ALTBL, ASTBL and TBILBL from LB. We will calculate BMI and BSA from height and weight using compute_bmi() and compute_bsa(). And we will calculate creatinine clearance CRCLBL and estimated glomerular filtration rate (eGFR) EGFRBL using compute_egfr() function.

#---- Derive additional baselines from VS and LB ----

labsbl <- lb %>%
  filter(LBBLFL == "Y" & LBTESTCD %in% c("CREAT", "ALT", "AST", "BILI")) %>%
  mutate(LBTESTCDB = paste0(LBTESTCD, "BL")) %>%
  select(STUDYID, USUBJID, LBTESTCDB, LBSTRESN)

covar_vslb <- covar %>%
  derive_vars_merged(
    dataset_add = vs,
    filter_add = VSTESTCD == "HEIGHT",
    by_vars = exprs(STUDYID, USUBJID),
    new_vars = exprs(HTBL = VSSTRESN)
  ) %>%
  derive_vars_merged(
    dataset_add = vs,
    filter_add = VSTESTCD == "WEIGHT" & VSBLFL == "Y",
    by_vars = exprs(STUDYID, USUBJID),
    new_vars = exprs(WTBL = VSSTRESN)
  ) %>%
  derive_vars_transposed(
    dataset_merge = labsbl,
    by_vars = exprs(STUDYID, USUBJID),
    key_var = LBTESTCDB,
    value_var = LBSTRESN
  ) %>%
  mutate(
    BMIBL = compute_bmi(height = HTBL, weight = WTBL),
    BSABL = compute_bsa(
      height = HTBL,
      weight = HTBL,
      method = "Mosteller"
    ),
    # Derive CRCLBL and EGFRBL using new function
    CRCLBL = compute_egfr(
      creat = CREATBL, creatu = "SI", age = AGE, weight = WTBL, sex = SEX,
      method = "CRCL"
    ),
    EGFRBL = compute_egfr(
      creat = CREATBL, creatu = "SI", age = AGE, weight = WTBL, sex = SEX,
      method = "CKD-EPI"
    )
  ) %>%
  rename(TBILBL = BILIBL)
USUBJIDN AGE SEXN HTBL WTBL CREATBL ALTBL ASTBL
1015 63 2 147.32 54.43 79.56 27 40
1023 64 1 162.56 80.29 123.76 23 21
1028 71 1 177.80 99.34 123.76 26 24
1033 74 1 175.26 88.45 132.60 16 20
1034 77 2 154.94 62.60 88.40 15 23
1047 85 2 148.59 67.13 88.40 22 25
1057 59 2 NA NA NA NA NA
1097 68 1 168.91 78.02 123.76 16 19
1111 81 2 158.24 59.88 79.56 23 28
1115 84 1 181.61 78.93 114.92 18 26

Combine Covariates with ADPPK Data

Finally, we combine the covariates with the ADPPK data.

# Combine covariates with APPPK data

adppk <- adppk_aseq %>%
  derive_vars_merged(
    dataset_add = covar_vslb,
    by_vars = exprs(STUDYID, USUBJID)
  ) %>%
  arrange(STUDYIDN, USUBJIDN, AFRLT, EVID) %>%
  mutate(RECSEQ = row_number())
USUBJIDN AGE SEXN CREATBL EVID AMT DV MDV RECSEQ
1028 71 1 123.76 0 NA 0.0000000 0 1
1028 71 1 123.76 1 54 NA 1 2
1028 71 1 123.76 0 NA 0.1015662 0 3
1028 71 1 123.76 0 NA 0.5469018 0 4
1028 71 1 123.76 0 NA 0.9254654 0 5
1028 71 1 123.76 0 NA 1.1875059 0 6
1028 71 1 123.76 0 NA 1.3688894 0 7
1028 71 1 123.76 0 NA 1.6831476 0 8
1028 71 1 123.76 0 NA 1.7552923 0 9
1028 71 1 123.76 0 NA 24.9423721 0 10

Add Labels and Attributes

Adding labels and attributes for SAS transport files is supported by the following packages:

NOTE: All these packages are in the experimental phase, but the vision is to have them associated with an End to End pipeline under the umbrella of the pharmaverse. An example of applying metadata and perform associated checks can be found at the pharmaverse E2E example.

Example Scripts

ADaM Sourcing Command
ADPC use_ad_template("ADPC")
ADPPK use_ad_template("ADPPK")