Free Statistics

of Irreproducible Research!

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_CARE Data Boxplot.wasp
Title produced by softwareCARE Data - Boxplots and Scatterplot Matrix
Date of computationFri, 29 Oct 2010 10:36:25 +0000
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2010/Oct/29/t12883494270nuygh4h3rqrl9s.htm/, Retrieved Thu, 02 May 2024 20:11:23 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=90000, Retrieved Thu, 02 May 2024 20:11:23 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact101
Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
-       [CARE Data - Boxplots and Scatterplot Matrix] [Variable 6% trimm...] [2010-10-29 10:36:25] [522d6896c450250634b4509ab3165d44] [Current]
Feedback Forum

Post a new message
Dataseries X:
3.4	2.2	2.2	3.2	2.25	2
3.4	2.2	3.2	3.4	2.333333333	2.75
3.8	2.8	3.6	3.6	2.5	3.25
3.8	3.6	3.8	3.8	3.2	3.25
3.8	3.6	3.8	3.8	3.25	3.5
4	3.6	4	3.8	3.4	3.75
4	3.8	4	3.8	3.6	3.8
4	3.8	4	3.8	3.75	3.8
4	3.8	4	4	3.8	3.8
4	4	4	4	3.8	3.8
4	4	4	4	3.8	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4	4	4
4	4	4	4.2	4	4
4	4	4	4.2	4	4
4	4	4.2	4.2	4	4
4	4	4.2	4.2	4	4
4	4	4.2	4.2	4	4
4	4	4.2	4.2	4	4
4	4	4.2	4.2	4	4
4.2	4	4.2	4.2	4	4
4.2	4	4.2	4.2	4	4
4.2	4.2	4.2	4.2	4	4
4.2	4.2	4.2	4.2	4	4
4.2	4.2	4.2	4.2	4	4
4.2	4.2	4.2	4.2	4	4
4.2	4.2	4.2	4.2	4	4
4.2	4.2	4.4	4.4	4	4
4.2	4.2	4.4	4.4	4	4
4.2	4.2	4.4	4.4	4	4
4.2	4.25	4.4	4.4	4.2	4
4.2	4.4	4.4	4.4	4.2	4.2
4.2	4.4	4.4	4.4	4.2	4.2
4.4	4.4	4.6	4.4	4.2	4.2
4.4	4.4	4.6	4.6	4.2	4.2
4.4	4.4	4.6	4.6	4.2	4.2
4.4	4.4	4.6	4.6	4.2	4.2
4.4	4.4	4.6	4.6	4.2	4.2
4.4	4.4	4.6	4.6	4.2	4.25
4.4	4.4	4.6	4.6	4.2	4.25
4.4	4.4	4.6	4.6	4.333333333	4.4
4.4	4.6	4.6	4.6	4.4	4.4
4.4	4.6	4.6	4.6	4.4	4.4
4.4	4.6	4.6	4.6	4.4	4.4
4.4	4.6	4.666666667	4.6	4.4	4.4
4.4	4.6	4.8	4.6	4.4	4.4
4.6	4.6	4.8	4.6	4.4	4.4
4.6	4.6	4.8	4.6	4.4	4.4
4.6	4.6	4.8	4.8	4.4	4.4
4.6	4.6	4.8	4.8	4.4	4.4
4.6	4.6	4.8	4.8	4.4	4.4
4.6	4.6	4.8	4.8	4.4	4.4
4.6	4.8	4.8	4.8	4.4	4.5
4.8	4.8	5	4.8	4.4	4.5
4.8	4.8	5	4.8	4.4	4.5
4.8	4.8	5	4.8	4.4	4.6
4.8	4.8	5	4.8	4.4	4.6
4.8	4.8	5	4.8	4.4	4.6
4.8	4.8	5	4.8	4.6	4.6
4.8	4.8	5	5	4.6	4.6
4.8	5	5	5	4.6	4.6
5	5	5	5	4.6	4.6
5	5	5.2	5	4.6	4.6
5	5	5.2	5	4.6	4.666666667
5	5	5.2	5	4.6	4.75
5	5	5.2	5	4.75	4.75
5	5	5.2	5	4.75	4.8
5	5	5.2	5	4.8	4.8
5	5	5.4	5	4.8	4.8
5	5.2	5.4	5	4.8	4.8
5	5.2	5.4	5.2	5	4.8
5.2	5.2	5.4	5.2	5	5
5.2	5.2	5.4	5.2	5	5
5.2	5.2	5.6	5.2	5	5
5.4	5.333333333	5.6	5.2	5	5
5.4	5.4	5.6	5.2	5	5
5.4	5.4	5.6	5.2	5.2	5
5.4	5.4	5.6	5.4	5.2	5
5.4	5.4	5.6	5.4	5.2	5
5.6	5.6	5.8	5.4	5.2	5
5.6	5.6	5.8	5.6	5.2	5
5.666666667	5.6	5.8	5.6	5.25	5
6	5.6	5.8	5.6	5.5	5.2
6	5.6	6	5.8	5.6	5.2
6	5.6	6	6	5.8	5.2
6	6	6	6.2	5.8	5.4
6	6	6.2	6.2	5.8	5.8
6	6.8	6.4	7	6	6.4




Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135
R Framework error message
The field 'Names of X columns' contains a hard return which cannot be interpreted.
Please, resubmit your request without hard returns in the 'Names of X columns'.

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
R Framework error message & 
The field 'Names of X columns' contains a hard return which cannot be interpreted.
Please, resubmit your request without hard returns in the 'Names of X columns'.
\tabularnewline \hline \end{tabular} %Source: https://freestatistics.org/blog/index.php?pk=90000&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[ROW][C]R Framework error message[/C][C]
The field 'Names of X columns' contains a hard return which cannot be interpreted.
Please, resubmit your request without hard returns in the 'Names of X columns'.
[/C][/ROW] [/TABLE] Source: https://freestatistics.org/blog/index.php?pk=90000&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=90000&T=0

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135
R Framework error message
The field 'Names of X columns' contains a hard return which cannot be interpreted.
Please, resubmit your request without hard returns in the 'Names of X columns'.







Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
compmemomean444.44.85.67
Specmemmean3.644.455.6
compattenmean44.24.655.8
specattenmean3.84.24.655.6
compappliedmean3.444.24.65.25
specappliedmean 3.7544.254.65

\begin{tabular}{lllllllll}
\hline
Boxplot statistics \tabularnewline
Variable & lower whisker & lower hinge & median & upper hinge & upper whisker \tabularnewline
compmemomean & 4 & 4 & 4.4 & 4.8 & 5.67 \tabularnewline
Specmemmean & 3.6 & 4 & 4.4 & 5 & 5.6 \tabularnewline
compattenmean & 4 & 4.2 & 4.6 & 5 & 5.8 \tabularnewline
specattenmean & 3.8 & 4.2 & 4.6 & 5 & 5.6 \tabularnewline
compappliedmean & 3.4 & 4 & 4.2 & 4.6 & 5.25 \tabularnewline
specappliedmean
 & 3.75 & 4 & 4.25 & 4.6 & 5 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=90000&T=1

[TABLE]
[ROW][C]Boxplot statistics[/C][/ROW]
[ROW][C]Variable[/C][C]lower whisker[/C][C]lower hinge[/C][C]median[/C][C]upper hinge[/C][C]upper whisker[/C][/ROW]
[ROW][C]compmemomean[/C][C]4[/C][C]4[/C][C]4.4[/C][C]4.8[/C][C]5.67[/C][/ROW]
[ROW][C]Specmemmean[/C][C]3.6[/C][C]4[/C][C]4.4[/C][C]5[/C][C]5.6[/C][/ROW]
[ROW][C]compattenmean[/C][C]4[/C][C]4.2[/C][C]4.6[/C][C]5[/C][C]5.8[/C][/ROW]
[ROW][C]specattenmean[/C][C]3.8[/C][C]4.2[/C][C]4.6[/C][C]5[/C][C]5.6[/C][/ROW]
[ROW][C]compappliedmean[/C][C]3.4[/C][C]4[/C][C]4.2[/C][C]4.6[/C][C]5.25[/C][/ROW]
[ROW][C]specappliedmean
[/C][C]3.75[/C][C]4[/C][C]4.25[/C][C]4.6[/C][C]5[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=90000&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=90000&T=1

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
compmemomean444.44.85.67
Specmemmean3.644.455.6
compattenmean44.24.655.8
specattenmean3.84.24.655.6
compappliedmean3.444.24.65.25
specappliedmean 3.7544.254.65







Boxplot Notches
Variablelower boundmedianupper bound
compmemomean4.264.44.54
Specmemmean4.234.44.57
compattenmean4.464.64.74
specattenmean4.464.64.74
compappliedmean4.14.24.3
specappliedmean 4.154.254.35

\begin{tabular}{lllllllll}
\hline
Boxplot Notches \tabularnewline
Variable & lower bound & median & upper bound \tabularnewline
compmemomean & 4.26 & 4.4 & 4.54 \tabularnewline
Specmemmean & 4.23 & 4.4 & 4.57 \tabularnewline
compattenmean & 4.46 & 4.6 & 4.74 \tabularnewline
specattenmean & 4.46 & 4.6 & 4.74 \tabularnewline
compappliedmean & 4.1 & 4.2 & 4.3 \tabularnewline
specappliedmean
 & 4.15 & 4.25 & 4.35 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=90000&T=2

[TABLE]
[ROW][C]Boxplot Notches[/C][/ROW]
[ROW][C]Variable[/C][C]lower bound[/C][C]median[/C][C]upper bound[/C][/ROW]
[ROW][C]compmemomean[/C][C]4.26[/C][C]4.4[/C][C]4.54[/C][/ROW]
[ROW][C]Specmemmean[/C][C]4.23[/C][C]4.4[/C][C]4.57[/C][/ROW]
[ROW][C]compattenmean[/C][C]4.46[/C][C]4.6[/C][C]4.74[/C][/ROW]
[ROW][C]specattenmean[/C][C]4.46[/C][C]4.6[/C][C]4.74[/C][/ROW]
[ROW][C]compappliedmean[/C][C]4.1[/C][C]4.2[/C][C]4.3[/C][/ROW]
[ROW][C]specappliedmean
[/C][C]4.15[/C][C]4.25[/C][C]4.35[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=90000&T=2

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=90000&T=2

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Boxplot Notches
Variablelower boundmedianupper bound
compmemomean4.264.44.54
Specmemmean4.234.44.57
compattenmean4.464.64.74
specattenmean4.464.64.74
compappliedmean4.14.24.3
specappliedmean 4.154.254.35







Boxplot Means
Variabletrimmed meanunbiased SD
compmemomean4.480.48
Specmemmean4.510.51
compattenmean4.640.55
specattenmean4.560.46
compappliedmean4.320.42
specappliedmean 4.340.38

\begin{tabular}{lllllllll}
\hline
Boxplot Means \tabularnewline
Variable & trimmed mean & unbiased SD \tabularnewline
compmemomean & 4.48 & 0.48 \tabularnewline
Specmemmean & 4.51 & 0.51 \tabularnewline
compattenmean & 4.64 & 0.55 \tabularnewline
specattenmean & 4.56 & 0.46 \tabularnewline
compappliedmean & 4.32 & 0.42 \tabularnewline
specappliedmean
 & 4.34 & 0.38 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=90000&T=3

[TABLE]
[ROW][C]Boxplot Means[/C][/ROW]
[ROW][C]Variable[/C][C]trimmed mean[/C][C]unbiased SD[/C][/ROW]
[ROW][C]compmemomean[/C][C]4.48[/C][C]0.48[/C][/ROW]
[ROW][C]Specmemmean[/C][C]4.51[/C][C]0.51[/C][/ROW]
[ROW][C]compattenmean[/C][C]4.64[/C][C]0.55[/C][/ROW]
[ROW][C]specattenmean[/C][C]4.56[/C][C]0.46[/C][/ROW]
[ROW][C]compappliedmean[/C][C]4.32[/C][C]0.42[/C][/ROW]
[ROW][C]specappliedmean
[/C][C]4.34[/C][C]0.38[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=90000&T=3

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=90000&T=3

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Boxplot Means
Variabletrimmed meanunbiased SD
compmemomean4.480.48
Specmemmean4.510.51
compattenmean4.640.55
specattenmean4.560.46
compappliedmean4.320.42
specappliedmean 4.340.38



Parameters (Session):
par1 = 3 ; par2 = TRUE ; par3 = 6 ;
Parameters (R input):
par1 = 3 ; par2 = TRUE ; par3 = 6 ;
R code (references can be found in the software module):
par1 <- as.numeric(par1) #colour
par2<- as.logical(par2) # Notches ?
par3<-as.numeric(par3) # % trim
if(par3>45){par3<-45;warning('trim limited to 45%')}
if(par3<0){par3<-0;warning('negative trim makes no sense. Trim is zero.')}
lotrm<-as.integer(length(y[1,])*par3/100)+1
hitrm<-as.integer(length(y[1,])*(100-par3)/100)
y1<-array(dim=c(dim(y)[1], hitrm-lotrm+1), dimnames=list(dimnames(y)[[1]], 1:(hitrm-lotrm+1) ))
for(i in 1:dim(y)[1]){
tmp<-order(y[i,])
y1[i,]<- y[i, tmp[lotrm:hitrm] ]
}
bitmap(file='test2.png')
pairs(t(y))
dev.off()
y<-y1
z <- as.data.frame(t(y))
bitmap(file='test1.png')
(r<-boxplot(z ,xlab=xlab,ylab=ylab,main=main,notch=par2,col=par1))
dev.off()
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('overview.htm','Boxplot statistics','Boxplot overview'),6,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,hyperlink('lower_whisker.htm','lower whisker','definition of lower whisker'),1,TRUE)
a<-table.element(a,hyperlink('lower_hinge.htm','lower hinge','definition of lower hinge'),1,TRUE)
a<-table.element(a,hyperlink('central_tendency.htm','median','definitions about measures of central tendency'),1,TRUE)
a<-table.element(a,hyperlink('upper_hinge.htm','upper hinge','definition of upper hinge'),1,TRUE)
a<-table.element(a,hyperlink('upper_whisker.htm','upper whisker','definition of upper whisker'),1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
for (j in 1:5)
{
a<-table.element(a,round(r$stats[j,i], digits=2))
}
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable.tab')
if (par2){
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Boxplot Notches',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,'lower bound',1,TRUE)
a<-table.element(a,'median',1,TRUE)
a<-table.element(a,'upper bound',1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
a<-table.element(a,round(r$conf[1,i], digits=2))
a<-table.element(a, round(r$stats[3,i], digits=2))
a<-table.element(a,round(r$conf[2,i], digits=2))
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable1.tab')
}
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Boxplot Means',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,hyperlink('trimmed_mean.htm','trimmed mean','definition of trimmed mean'),1,TRUE)
a<-table.element(a,hyperlink('unbiased1.htm','unbiased SD','definition of unbiased SD'),1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
a<-table.element(a,round(mean(z[i], trim=par3/100, na.rm=TRUE), digits=2))
a<-table.element(a,round(sd(z[i], na.rm=TRUE), digits=2))
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable2.tab')